Strainers, Level Gauges And Sight Flow Indicators

Gas Strainers With Flanges Connections - Radial Valves

Gas Strainers With Flanges Connections - Radial Valves

These are used on the pipeline sections where their installation is more suitable than that of axial valves. This type is used for high pressure installations. The housing is made of carbon or stainless steel. Valve ends can be threaded, welded SW, BW or flanged. They are made for pressure grades PN6-PN300bar and in sizes DN15-DN300. Filter fineness depends on the request and can go from 5µm to 25µm (fine filtration) or 25µm -200µm (rough filtration). The sieve is made of stainless steel.

Type:EHN-RT-SP

Strainers With Welding Ends - Axial Valves

Strainers With Welding Ends - Axial Valves

Besides those with welded ends, strainers can have flanged or threaded ends. The housing is made of stainless steel or steel depending on the type of gas, and the filter grid is made of stainless steel. These are produced for pressure grades PN6-PN300 bar and in sizes DN15-DN300. Filter fineness depends on the request and can go from 5µm to 25µm (fine filtration) or 25µm -200µm (rough filtration).

Type:EHN-A-SZ

Level Gauge With Threaded Ends And Relieving Tap

Level Gauge With Threaded Ends And Relieving Tap

These are used for reading the level of liquid  in a tank. The glass pipe of the level gauge is protected with stainless steel pipe which is open on both sides and this provides clearer reading. Sealing is perfomed with additional tightening of the nut which can not demage the glass pipe.Level gauges can be made with flanged connections.

Type:EN-SN

Plastic Strainers - Radial Valves

Plastic Strainers - Radial Valves

The ends of these strainers can be threaded, flanged, welded or hose.The housing is made of PEHD (high consistency polyethene) or PPHD (high consistency polypropylene). These are made in sizes DN10-DN50 and for pressure grades up to PN16 bar.They are used in HCL plants.

Type:EHN-PE

Visor Glass With Flanged Ends

Visor Glass With Flanged Ends

These are used when visual flow control is sufficient.These are produced with flanged, welded SW,BW or threaded ends. The housing is made of structural steel or stainless steel. Visor glass is tempered and suitable for temperatures are up to 300 C °.

Type:EVSK-CP

Strainers With Flanged Connections - Radial Valves

Strainers With Flanged Connections - Radial Valves

These are used on the pipeline sections where installation of axial valves is not possible.The  housling is made of cast steel or grey cast and the filter grid is made of stainless steel. These are produced for pressure grades PN6-PN40 bar and in sizes DN15-DN300.Filter fineness depends on the request and can go from 5µm to 25µm (fine filtration) or 25µm - 200µm (rough filtration).

Type:EHR-RPC