Cryogenic And Cryogas Equipment - O₂, N₂, Ar, CO₂, N₂O

Blind cap

Blind cap

Blind cap for liquid gas flange. It is used for transporting liquid gases as protection from leakage, in case of globe element failure.The blind cap contains a PTFE gasket and a chain which connects it with the intake place on transportation tanks.The blind cap is made of brass.

Screw Nut TR90X8

Navrtka TR90x8

Screw nut TR90X8 with safety system and hose addition with external thread G6/4. Thanks to the safety system(key/keyhole) on the screw nut the nut can be tightened only on the flange provided for the same liquid gas. The screw nut contains little balls which enable turning of the hose connection. The screw nut and the hose connection are made of brass and the balls are made of stainless steel. It is used in liquid gas intake ducts.

The screw nut is produced in accordance with EIGA 909/03/E standard(EIGA CRYOGENIC GASES COUPLINGS FOR TANKER FILLING).

Protection Cork

Protection Cork

This cork protects the loose part of the hose for liquid gas transfer. There is a screw nut  with a keyhole at the end of the hose. There is a key on the cork which fits the keyhole of the screw nut. The nut is made of PEHD and the chain is made of stainless steel.

S Key

S Key

S key is used for tightening liquid gas screw nuts. The key is made of stainless steel.

Flange TR90X8

Flange TR90X8

Flange TR90X8 with safety system.Thanks to the safety system (key/keyhole) on the flange the only screw nut which can be tightened on the flange is the one provided for the same liquid gas. The flange is made of stainless steel. It is used in liquid gas intake ducts.DN60 PN40 

The flange is produced in accordance with EIGA 909/03/E standard (EIGA CRYOGENIC GASES COUPLINGS FOR TANKER FILLING).