Ball Valves With Pneumatic Actuator

One-Piece Ball Valves With Pneumatic Actuator

One-Piece Ball Valves With Pneumatic Actuator

Thanks to its construction these valves are most suitable for installation on the pippelines with industrial and combustion gases. One-piece ball valves are made of stainless and carbon steel. They are produced in sizes DN15 - DN50. This type of one-piece ball valve has one-way pneumatic actuator. This type of one-piece ball valve with pneumatic one-way actuator is set in highly responsible positions.They are produced for pressure grade PN6 - PN300.

Type: EJKS-SP- PJ

Ball Valves With Reducer

Ball Valves With Reducer

They are driven by electric motor, and controlled from the contol room. Electronics on the ball valves have output signals that indicate open or shut valve position.These valves are manually driven and have signal light which indicates the mode: manual or motor. Motor characteristics: 80W, 220V, number of turns is 2750 RPM. Reducer characteristics: transferring ratio 1:7000, torque max: 250Nm. Installation of regulatory control system is possible.

Type: ETS-CP- EM

Three-way Ball Valves With Pneumatic Actuator

Three-way Ball Valves With Pneumatic Actuator

Three-way bidirectional ball valves with pneumatic actuator with hot water fittings. They have lined housing, and flow of hotwater between the lining and the housing keeps the fluid at the desired temperature. This system is used in food industry in the production of chocolate. Connection with the pipeline can be flanged, threaded, welded or hose.

Type: TKS-SP- O-PD

Plate Gate Valve With Linear Pneumatic Actuator

Plate Gate Valve With Linear Pneumatic Actuator

Gate valves with linear pneumatic double action actuator are made of structural or stainless steel. Their control panels have appropiate surface hardness. They are produced in sizes DN50 - DN300 and for pressure grade PN6 - PN10. Gate valves are used as shut-off valves in transporting abrasive fluids, lime,pulp through pipelines. It is recommended to install them in the pipelines where they can be wide open or shut.They are not suitble for installation in places with high frequency of opening and closing.

Ball Valves With Pneumatic Drive System - Rotating Cylinders

Ball Valves With Pneumatic Drive System - Rotating Cylinders

Pipeline gas is used to start the oparating process (air, nitrogen, methane CNG, CO₂). Pipeline pressure reduces in cascades until it reaches the pneumatic drive system. The valve is opened and closed by electrical or pneumatic impulse. These ball valves are made of stainless steel, carbon steel, brass.

Type:EJS-SP- PP-DD- KS